FloorCare Multi Surface Finish

Overview
Directions
Ingredients

Restores, shines and protects tile and
vinyl floors and a whole lot more.

Pledge^® FloorCare Multi Surface Finish provides a beautiful, transparent, long-lasting shine that stands up to the wear and tear of heavy traffic without yellowing. It helps restore the shine of older floors and prevents dirt from getting trapped in grooves and indentations, which makes cleaning vinyl and tile floors easier.

Pledge^® FloorCare Multi Surface Finish is safe to use on:

No-Wax Floors

Ceramic Tile Floors (Sealed)

Masonry Floors

Asphalt Tile Floors

Vinyl Floors

Linoleum Floors

Rubber Tile Floors

Flagstone Floors (Sealed)

Stone Floors (Sealed)

Slate Floors (Sealed)

Terrazzo Floors

*from pet dander †safe to use only on finished, sealed surfaces

Thoroughly clean floor with FloorCare Multi Surface Squirt & Mop, let floor dry, then spread Pledge^® FloorCare Multi Surface Finish evenly with a clean sponge mop, cloth or other applicator. Pledge^® FloorCare Multi Surface Finish will normally dry in 20–30 minutes.

Helpful Hints:

For increased shine and protection, a second coat of Pledge^® FloorCare Multi Surface Finish may be applied. Allow 8 hours between applications.
First-time users should thoroughly clean their floor with a solution of 1 cup ammonia and 1/4 cup Pledge^® FloorCare Multi Surface Concentrated Cleaner in 1/2 gallon cool water. Then rinse floor with clean water.
Pledge^® FloorCare Multi Surface Finish should be removed from your floor every 6 to 8 applications, or annually, with a solution of 1 cup ammonia and 1/4 cup Pledge^® FloorCare Multi Surface Concentrated Cleaner in 1/2 gallon cool water. Then rinse floor with clean water.
For wood floors, use Pledge^® FloorCare Wood Finish.

Keep out of reach of children and pets.